[CAD/CAM/CNC] Lesson 13: Lathe Basic Programming Example ID/OD Turning/Boring Operations

[CAD/CAM/CNC] Lesson 13:  Lathe Basic Programming Example ID/OD Turning/Boring Operations 
----------------------

A full CNC programming example with ID/OD (Turning/Boring operations) for cnc machinists who work on a cnc lathe machine. A must to learn/practice for those who are learning cnc programming.

The added benefit of this programming example is that no cnc lathe canned cycle is used in this programming example.

CNC Lathe Basic Programming Example (Turning Boring Operations)

CNC Lathe Example Turning Boring

O0000 
N10 (ø30 DRILL) 
G50 T0200 
G97 S250 M03 
G00 X0 Z5.0 T0202 M08 
G01 Z-5.0 F0.07 
W1.0 
Z-40.0 F0.25 
G00 Z5.0 
Z-39.0 
G01 Z-60.0 
G00 Z10.0 
X200.0 Z200.0 T0200 
M01 
N20 (Outside diameter stock removal) 
G50 S1500 T0100 
G96 S180 M03 
G00 X94.0 Z5.0 T0101 M08 
G01 Z-14.8 F0.27 
G00 U2.0 Z0.5 
G01 X28.0 F0.23 
G00 X87.0 W1.0
G01 Z-14.8 F0.27 
G00 U2.0 Z1.0 
X80.5 
G01 Z-14.1 
G02 X81.9 Z-14.8 R0.7 
G00 X100.5 W1.0 
G01 Z-29.8 
G00 U2.0 Z-1.0 
G01 X60.5 F0.23 
G00 X82.0 W1.0 
Z-2.4 
G01 X60.5 
X72.9 
G03 X80.5 Z-6.2 R3.8 
G00 U2.0 Z5.0 
X200.0 Z200.0 T0100 
M01
N30 (Inside diameter stock removal) 
G50 S1500 T0400 
G96 S180 M03 
G00 X34.5 Z3.0 T0404 M08 
G01 Z-41.8 F0.27 
G00 U-0.5 Z1.0 
X39.5 
G01 Z-15.0 
X34.5 Z-24.3 
G00 Z10.0 
X200.0 Z200.0 T0400 
M01 
N40 (Out diameter finishing) 
G50 S1800 T0500 
G96 S200 M03 
G00 X63.0 Z5.0 T0505 M08 
Z0 
G01 X38.0 F0.2 
G00 X60.0 Z3.0 
G42 Z1.0 
G01 Z-2.5 F0.2 
X74.0 
G03 X80.0 Z-5.5 R3.0 
G01 Z-13.5 
G02 X83.0 Z-15.0 R1.5 
G01 X100.0 
Z-30.0 
X102.0 
G40 G00 U2.0 W1.0 
G00 Z10.0 
X200.0 Z200.0 T0500 
M01
N50 (Inside diameter finishing) 
G50 S1800 T0600 
G96 S200 M03 
G00 X40.0 Z5.0 T0606 M08 
G41 Z1.0 
G01 Z-15.0 F0.2 
X35.0 Z-24.33 
Z-42.0 
X29.0 
G40 G00 Z10.0 
X200.0 Z200.0 T0600 M09 
M30